Vibration Anaylser Cum Balancer 6060
Features
Vibration Measurement, frequency analysis and Field Balancing in a single, compact and portable instrument.
True rms measurements as per ISO 2372 and IS 11724; including Overall measurements for varying vibration levels.
Two-channel automatic scanning, storage of spectra on pen drive, and peaks finding .
Single- plane and Two- plane dynamic field balancing vector calculations built- in.
Spectra transfer via pen drive to a PC. Use with Windows based software VS23 for a powerful condition monitoring plant-wide program.
User- friendly interface with 4 line backlit display.
Two inputs for Accelerometer sensors.
Lightweight, sturdy, portable and rechargeable battery operated.
Technical Data
| Inputs | Two inputs for accelerometers, one for reference tachosensor |
| Measurement Modes | Acceleration (RMS- m/sec2 ); Bearing Spike (RMSm/sec2 ); Velocity (RMS-mm/sec); Displacement (PK-Pk microns) |
| Measurement Ranges | Three manually selectable ranges and Auto-ranging. |
| Acceleration | 0-2.5 to 0-250 m/sec2 True RMS in 3 scales. |
| Velocity | 0-2.5 to 0-250 mm/sec True RMS in 3 scales. |
| Displacement | 0-25 to 0-2500 microns Pk-Pk in 3 scales. |
| Frequency Range | ISO (10Hz-1kHz); 1Hz-1kHz ; 1Hz-10kHz; 10Hz-10kHz |
| Measurements | Overall Vibration measurement as per selected mode Synchronous Vibration measurement through Auto tracking filter Cartesian (x,y) or Polar (amount,angle) Vibration vector measurement Min/Max/Mean of 20 overall readings |
| Frequency Analysis | Microprocessor controlled frequency analysis over 1 Hz-10kHz with constant percentage bandwidth filter in 1% steps over 1 Hz-1kHz and 2% steps over 1kHz10kHz. Facility to Pause scanning at any frequency Automatic Peak finding and display routine. Saving in Data Memory for later transfer to PC |
| Data Memories | Adequate for storing 24 spectra. After transfer to the PC, an almost infinite spectra can be stored on the disk of the PC. |
| Balalncing | Single Plane Balancing Single Plane re-balancing without trial weight Two-plane Balancing Two-plane re-balancing without trial weights Easy to follow procedure with prompting of steps. |
| Dimensions | 288 (W) x 280 (H) x 102 (D) mm. Supplied fitted in a foam-lined briefcase |
| Battery | Internal rechargeable battery. Approx charge life of 6- 10 hours continuous use, and a life of approx 500 deep cycles. |
| Battery charger | Separately supplied as standard accessory Temperature range : 0-45 Deg C upto 90% humidity (non-condensing) |
| Temperature range | 0-45 Deg C upto 90% humidity (non-condensing) |
| Weight | 2.8 Kgms approx. without carrying case |
| Standard Accessories | 1 Sensor with 3m lead, 1 Magnetic base, 1 reference
sensor, 1 magnetic stand, 1 battery charger, Briefcase
type carrying case, and 1 Operation Manual NOTE: 2 Plane balancing requires 2 sensors. |
